Clearly Besotted Teasers | Fairy Tale Bears

Hello there and welcome to the final day of Clearly Besotted teasers! The new products release tomorrow at 8pm BST. My final teaser uses the adorable Fairy Tale Bears set, it is so cute. I paired up with two older sets to create a little scene.

 

I started off by stamping the Fairy Tale Bears set on to a panel of white cardstock with Memento Tuxedo Black ink. I created a mask from mask paper and added this on top. I took the grass stamp from the Best Friends set and stamped this either side of the characters. The grass was also masked off and then I stamped the fence (also from the Best Friends set) above. Finally, the sentiment from the Scrumptious Script set was stamped below.

 

 

The image and surroundings were coloured using Copic Markers (the colours I used are listed below the supplies section). The panel was then simply adhered to a white A2 card base with foam sheet and DST. I am loving these fairy tale stamps, how about you? Goldilocks and the Three Bears was definitely a story that I grew up with and it is really lovely to see it in stamp form :)

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

COPIC MARKERS: Girl - Skin: E70, E13, E11, E00, E000, E50, R20. Hair: E55, E53, E51, E50. Clothes: B26, B24, B21, C3, C1. Bears - E47, E44, E43, E42, E41, E40. Daddy clothes - V17, V15, V12. Mummy clothes - R85, R83, R81. Fence - W3, W1, W00. Grass - G43, G40. Sky - B00, B000, B0000, 0.

 

Thank you so much for visiting me today, I very much appreciate it. Please do head over to see what my teamies Stephanie, Keren and Lisa have been up to, as well as our fabulous guest designer Rubeena. See you tomorrow for the reveal of the sets. Have a great day!

Clearly Besotted Teasers | Under The Sea

Hello there and welcome to day three of the Clearly Besotted April Teasers. Not long to wait until the new products release on Sunday, 1st April. Today I am using the new Under The Sea Stamp Set, along with a sentiment from the new Say It's Love Stamp Set.

 

To start my card, I stamped a few of the images from the Under The Sea Stamp Set (it is filled with lots of fish, as well as a super cute diver but I didn't use them on my card today). I coloured them with Copic Markers (the colours I used will be listed below the supplies section) and fussy cut them out with scissors, but there will be coordinating dies that you can purchase.

 

 

I then worked on my sea. I took Distress Oxide inks and smooshed these on to a piece of plastic and sprayed with water. I then lifted the plastic up and smooshed it down on to a piece of watercolour paper. I did this in lots of layers with Broken China, Salty Ocean and Peacock Feathers inks. The piece was heat set and then cut into two domes using the MFT Stitched Domes Stax Dies. One of the pieces was further cut down using the CB Speckled Scallops Dies. I also cut one from vellum for some added interest.

 

 

I took an A2 white card base and ran this through my die cutting machine to emboss the front with the PTI Linen Impression Plate. I then popped up the first background dome with foam tape. I added the vellum wave on top with tape runner and then the bottom wave piece with more tape runner. The seaweed, shell and starfish were also added with tape runner. The jellyfish was added with foam tape. I took the 'hello' sentiment from the new Say It's Love Stamp Set and stamped this on to black cardstock with Versamark Ink. I applied white embossing powder and heat set. This was cut in to a strip and added to the card with foam tape. To finish off, I added Nuvo Aqua Shimmer pen to the jellyfish, starfish and shell.

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.

 

 

COPIC MARKERS: Jellyfish - Y17, Y15, Y12. Seaweed - YG17, YG23, YG03, YG01. Starfish - YR12, Y17, Y11. Shell - BV11, BV000.

 

This was a really fun scene to put together! Thank you so much for popping by to see me today, I really do appreciate it. Please do pop over to see what Stephanie, Keren and Lisa have been up to, along with out fabulous guest designer Rubeena. See you tomorrow for day four!

Clearly Besotted Teasers | Panda Wishes

Hello there and welcome to day two of the Clearly Besotted April Teasers. Today I am using two new sets that release on the 1st April. The first one is the adorable Panda Perfection set and the second, Flag It - a wonderful sentiment set.

 

I started off my card by creating the background. I took a piece of Yupo paper and added Copic Refills over the top to create an alcohol ink background. I first added a layer of B000 and then added on some B00 and BG11. I spritzed the piece with air (using a spritzing tool) to create interest on the panel and set aside to dry. Once dry, I took the bamboo image from the Panda Perfection set and stamped this twice on to the piece using Archival ink. This was again set aside to dry.

 

 

I took one of pandas from the stamp set and stamped this on to white cardstock using Memento Tuxedo Black ink. I coloured the image simply with Copic Markers, adding a little W3 and W1 for the pandas body and R20 for his mouth. I then fussy cut him out with scissors (there will be coordinating dies available to purchase). I die cut one of the Flag It dies (that matched the sentiment banner) and then stamped the sentiment from the new Flag It Stamp Set on top with Memento Tuxedo Black Ink. To neaten it up a little, I went around the edge of the die cut with a Memento Marker.
 

 

I adhered the Yupo background piece flat to the front of an A2 white card base with tape runner. I then took a panel of white cardstock and cut a SSS Stitched Square Die from it to create a window. This piece was added to the card base with foam tape. I then added the panda and sentiment strip also with foam tape.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

Isn't that panda just adorable? I love him! Thank you so much for visiting me today. Please do head over and see what my teamies Stephanie, Keren and Lisa have been up to, along with our fabulous guest designer Rubeena. See you tomorrow for day three. Have a great day!

Clearly Besotted Teasers | Best Balloons

Hello there and welcome to the start of the Clearly Besotted April Teasers. The new products will be releasing on the 1st April at 8pm BST. From now until then, myself and the rest of the Clearly Besotted Design Team will be sharing teasers of the new sets with you. My card today uses the new Best Balloons set.

 

I started off my card by stamping three of the balloons from the set (the set is filled with lots of wonderful different design balloons) on to white cardstock, using Memento Tuxedo Black Ink. I coloured the images using Copic Markers (the colours I used are listed below the supplies section). I then fussy cut them out with scissors but there will be coordinating dies available for them to purchase.

 

 

I took a panel of white cardstock and masked of the edges with post-it tape. Using Distress Oxide Inks, I blended colour on the inside to create a background for my balloons. The post-it tape was then removed. I stamped the strings on to the background and then added the panel on to a white A2 card base with ATG. The balloons were then added on top with foam tape. I took the 'happy birthday' sentiment from the Tiny Type set and stamped this with Versamark Ink on to a strip of black cardstock. I applied white embossing powder and heat set. This was also added to the card with foam tape. To finish off, I added Studio Katia Clear Round Drops to the background and black glaze pen to the balloon animal eyes.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

COPIC MARKERS: Elephant - W7, W5, W3, W1. Lion - E99, YR24, YR14, Y28, Y26. Monkey - E59, E57, E55, E53, E51.

 

Thank you so much for visiting me today. Please head over to see what my teamies Stephanie, Keren and Lisa have been up to, along with our fabulous guest designer Rubeena. See you tomorrow for day two! Have a great day!

VIDEO | Woodland Tea Party

Hello there, today I am over on the Hero Arts Blog and You Tube channel, sharing a card using the super cute Woodland Tea Party Stamp Set and coordinating Frame Cuts. I am also sharing how to create dimension with different layers, but without adding too much bulk.

 

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

For more details on how I made the card, please head over to the blog post. You can also watch the video directly on You Tube HERE. Thanks so much for stopping by today. I hope you have a great day!

Sending A Smile

Hello there, today I am over on the Hero Arts Blog sharing a card using the Flower Confetti Fancy Die, along with the new Smile Stamp & Cut. The Flower Confetti Die makes for great backgrounds. I decided to combine the die with the Liquid Watercolors to create this background but you could add colour in lots of different ways.

 

 

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

For more details on how I made the card, please see the post over on the blog. Thank you so much for stopping by to see me today. I hope you have a great rest of the day!

Zen Floral Hugs

Hello there, today I have a card to share using the beautiful Zen Floral Stamp Set from Honey Bee Stamps. I purchased this set a while back with this idea in my head and finally, I have actually got around to doing it! :)

 

I started off by taking a panel of Bristol cardstock (I like the Winsor & Newton one as it is quite a bright white) and prepped the cardstock with an anti-static tool. I stamped the long floral border stamp from the Zen Floral set at the top, using Versafine Onyx Black ink. I also stamped the Hugs stamp below, using the same ink. I applied clear embossing powder and then heat set.

 

 

Using rainbow colours of Distress Ink, I blended the colours over the embossed stamped border, overlapping the colours as I went through the rainbow. Once I had finished, I flicked some water on using a paintbrush. I let it sit for about 15 seconds and then picked it up with a paper towel. This gave some interest to the panel, which was then adhered flat to a black A2 card base with ATG. To finish off, I added a few Sparkling Clear sequins using Multi Medium Matte glue.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

I think I bought this set about six months ago! Oh well! I finally got around to using it ;) Please tell me that I am not the only one that does that. Please tell me that you also buy something and do not get around to using it until months later, come on, make me feel better! Haha! Thank you so much for popping by today. Have a great day!

Floral Frame Background

Hello there, today I have another alcohol ink background to share with you. I know, another one! I am so sorry! This time I decided to pair it with the beautiful Floral Border With Frame Fancy Die from Hero Arts.

 

I started off by creating the alcohol ink background on Yupo paper. I used Aqua, Patina, Citrus, Mermaid and Pool Tim Holtz Alcohol Inks, along with the Blending Solution and the Spritzing tool to spread the inks. I also splattered a few drops of the blending solution with a paint brush. The piece was then set aside to dry.

 

 

Once dry, the panel was cut down and added flat to a white A2 card base with tape runner. I took a panel of white cardstock and cut the Floral Border With Frame Fancy Die from it. I added foam tape to the back and added this on top of the alcohol ink background. I took the 'happy birthday' sentiment from the Eat Cake All Day Stamp & Cut and stamped this on to black cardstock with Versamark Ink. I applied white embossing powder and heat set. I then cut it down in to a strip and added it to the card with foam tape. To finish, I added a few Iridescent Jewels from Lucy's Cards.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

I am really enjoying using alcohol inks, I love all the different effects and textures you can get from them. Thank you so much for visiting me today, I hope you have a great day and a fabulous week!

Hello & Hugs

Hello there, after making this card I found that I really loved the design so I decided to create two more cards using the same layout but different supplies. I already had the alcohol ink background made, so these made for quick and easy cards too!

 

I started off by cutting the two hearts from the alcohol ink background. The background was made with Sail Boat Blue Alcohol Ink, along with a little Pearl Mixative on Yupo Paper. It is just a simple background with not much detail, but I thought it worked perfectly for these cards.

 

 

They were cut using a Hero Arts Heart Infinity Die. I then embossed a larger die on to two white A2 card bases. I added the alcohol ink heart on top with tape runner.

 

 

I took the Winnie & Walter In A Word Hugs and Hello Cutaway dies and cut each of these three times. They were stacked up with liquid glue to create a thicker piece. They were added to the cards with more liquid glue.

 

 

To finish off, I added Studio Katia Silver Crystals with Multi Medium Matte and a Jewel Picker. I thought the silver worked really well with the blue alcohol ink.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

Thank you so much for popping by to see me today, I really do appreciate it. I hope you are doing well. Have a wonderful day!

Dragonfly Birthday

Hello there, today I have a card to share using the Dragonfly Fancy Die from Hero Arts that was part of their last release. It is so pretty and I was inspired by this beautiful card by Lucy.

 

I started off by cutting the dragonfly from Pool Mix Layering Paper. I used the darkest of the shades in the collection. I then sprayed the piece with the new White Iridescent Shimmer Spray for some added sparkle and set aside to dry. I took the 'happy birthday' sentiment from the Color Layering Elephant stamp set and stamped this with black ink on to a white strip of cardstock.

 

 

I took a piece of Decorative Woodgrain cardstock and adhered this to a white A2 card base with tape runner. I then added the dragonfly on top with liquid glue, adding glue to the body and the inside of the wings but left the outside without, to let them pop up a little. The sentiment strip was then added on top with foam tape. To finish off, I added Lucy's Shimmering Pool Jewels to the body of the dragonfly.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

Sadly, the Iridescent Spray doesn't show in the photos, but in real life it does add a nice shimmer. Thank you so much for visiting me today, I really do appreciate it. I hope you are having a good week so far and have a fabulous day!

Libra Zodiac Girl

Hello there, today I have a little bit of a different project to share with you. I made a little art frame for my mum for Mother's Day yesterday, using the Stamping Bella Uptown Zodiac Girl Libra stamp. I thought the words matched my mum beautifully and although my mum doesn't have long hair now, she did when she was younger so the image does somewhat look like her.

 

I started off by cutting my piece of white cardstock to 6.5" x 6.5" and using a Stamp-a-ma-jig for placement, I stamped the girl first, followed by the wording and then the Libra word on top. The zodiac girl was then simply coloured using Copic Markers. The colours I used are listed below the supplies section. I decided to keep the colour scheme neutral for this one, as you can see.

 

 

Once the colouring was completed. I simply added the piece in to a 6" x 6" shadow box frame. I thought it would just be something different as a little present for her. Since it is a little bit difficult photographing something behind glass, I did take a photo with the piece not behind the glass for you to see too.

 

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

COPIC MARKERS: Skin - E13, E11, E00, E0000, E50. Hair - E49, E57, E27, E25, E23, E21. Dress: C10, C9, C8, C7, C6, C5, C3, C1. Shadow below feet - W1, W0. Scales - YR31, Y28, Y26.

 

Thank you so much for visiting me today, I really do appreciate it. I hope you are all doing well. Have a great day!

Happy Mother's Day

Hello there, today it is Mother's Day here in the UK and I am sharing the card that I have made for my mum. It uses the beautiful new Spring Bouquet stamp set from Studio Katia which they kindly sent me to have a play with. My mum loves flowers, so I thought it would be perfect for her.

 

I started off by stamping the image on to a panel of white cardstock that I cut using a pierced square die. I then coloured the image using Copic Markers. The colours I used are listed below the supplies section, if you are interested. Once coloured, I went around the outside of the flowers with a light blue colour to help them pop against the white background.

 

The panel was adhered to a black 5.25" x 5.25" card base with foam sheet and DST. I then took the sentiment from the set and stamped this on to more white cardstock with black ink. It was cut out and added to the card with foam tape. To finish off, I added a few of the new Iridescent Bubbles from Studio Katia. These are so pretty! I love the sheen on them.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

COPIC MARKERS: Top flower - V25, BV13, BV11, BV01, BV0000. Stem for buds - BG93, BG90, G40. Right flower - R39, R85, R83, R81. Left flower - V17, V15, V12, V01, V000. Leaves - BG78, BG75, BG72. Shadow - B63, B60.

 

Happy Mother's Day to all the UK and Irish mum's out there! Thank you so much for visiting me today, I hope you are having a wonderful weekend so far.

Welcome, Little One

Hello there, today is a super exciting day because the new Best Days release from Simon Says Stamp is live! They kindly sent me the Welcome, Little One die to use and I love it! I love that the die has two parts, the main writing and also a shadow part too. I decided to pair it up with the Picture Book Zebra die for a cute new baby card.

I started off by creating my background. I took an A2 white card base and covered up the edges with Post-It Tape. I then blended over Distress Oxide Ink in Broken China, adding darker saturation of colour at the bottom and lighter at the top. I placed the Medium Dots Stencil on top and using the same ink, blended in some dots for some added interest. I took a 5.25" x 4" panel of white cardstock and cut a Hero Arts Infinity Hearts die from it to create a window. This piece was added on to the card base with foam tape.
 

 

I took the Picture Book Zebra Die and cut this twice, once from white cardstock and once from black. I had already added Xyron adhesive to the back of the cardstock before die cutting the zebra, so that the pieces became a sticker. I adhered these to a piece of printer paper and then cut around it. The zebra was then popped up on thin foam squares and popped inside the heart window.

 

 

I took the Welcome, Little One Die and cut this from white cardstock. I took the thin wording piece and added the same Broken China Distress Oxide on to it, adding darker saturation of colour at the bottom. This was then added to the shadow part with liquid glue. This piece was added to the card with foam tape on the left (where it overlaps the heart window) and liquid glue on the right. To finish off, I added a little Doodlebug Heart Enamel Accent to the zebra and a little glaze pen to his eyes.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

How beautiful is the font on that sentiment? :) Thank you so much for stopping by today, I really do appreciate it. I hope you have a fabulous day!

Alcohol Ink Birthday Heart

Hello there, today I have a card to share that I made for a friend for her birthday last week. I do apologise that it is another card using alcohol inks but she really likes alcohol inks too, so I really wanted to use them for her card.

 

I started off by creating the alcohol ink background. I took a piece of Yupo paper and first added over some Cool Peri and Aqua Alcohol Ink. I then went in with drops of Purple Twilight, Raspberry, Turquoise and Pool inks and moved these around with the Spritzer tool (pushing air on to them). To finish off, I added little drops of Silver Mixative, followed by some of the Alcohol Ink Blending Solution. I then set the piece aside to dry.

 

 

Once dry, I die cut the piece using one of the Hero Arts Hearts Infinity Dies. I took a larger die and embossed this on to the front of an A2 white card base. The alcohol ink heart was added on top with tape runner. I die cut the MFT Happy Birthday die three times from white cardstock and stacked these up with liquid glue. The pieces were added to the card with liquid glue also. To finish off, I added a few Studio Katia Silver Foil Crystals.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

I shall try not to share another alcohol ink piece for a little while but honestly, I have had so much fun using them recently! Thank you so much for stopping by to see me today, I really do appreciate it. Have a great day!

Hero Arts March 2018 My Monthly Hero Kit Blog Hop + Giveaway

Hello there, today we are celebrating the release of the March My Monthly Hero Kit from Hero Arts. It is wonderful! It can be used for so many occasions. If you are following along in the hop, you should have arrived here from the fabulous Jessica, but if you get lost along the way, the full list of participants is below.

 

For my card, I started off by cutting the 'thank' die from the kit three times from white cardstock. I layered these up with liquid glue to create a thicker piece. I love the fonts on these word dies! I then created a base for my die-cut to sit on.

 

I took a piece of Yupo paper and first added on a layer of Cool Peri and Shell Pink Alcohol Inks. I spritzed air on to the piece with the Distress Spritzer and then added a layer of Raspberry and Purple Twilight Alcohol Inks. To finish off, I added in a few drops of Silver Mixative and blended this in with the Alcohol Ink Blending Solution and the Spritzer. This piece was set aside to dry.

 

 

Once dry, I cut it down in to a strip. I applied a generous coating of ant-static powder to it and then stamped the 'you' from the main kit stamp set using Versamark Ink. I applied white embossing powder and heat set. This was added to a white A2 card base with tape runner. I took a panel of white cardstock and ran this through my die cutting machine with the Bold Graphic Confetti Fancy Die, which is available as an add-on this month. I decided to emboss the die instead of cut it and it gave a lovely pattern on to the panel. I cut it down and added one piece above the alcohol ink strip and one piece below. The 'thank' piece was then added with more liquid glue.

 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. Products marked with an asterisk (*) were kindly sent to me to use.
 

 

THE KIT:

 

The March 2018 MMH Kit contains a 6" x 8" stamp set, 4 fancy word dies, 7 fancy shape dies, 4 sheets of black cardstock, 4 sheets of kraft cardstock, 4 sheets of white cardstock, sparkly sequins, Silver Sparkle embossing powder and a Unicorn White ink cube.

 

The value of the kit is $70 but you can get it for an amazing $34.99 (approx. £27 depending on exchange rate). Remember the kits are limited edition and often sell out quickly. You can subscribe here so that you never miss a kit. International subscribers get a discount off shipping too!

 

There are lots of wonderful add-on products this month. These are not limited and can be purchased from the Hero Arts Shop and also from your favourite Hero Arts retailer. Here is a look at them:

 

 

BLOG HOP:

 

Here is the full list of participants in the hop:

 

Hero Arts Blog

Jennifer McGuire

Yana Smakula

Emily Midgett
Wanda Guess
Janette Kausen
Ilina Crouse
Lydia Fiedler
Jessica Frost-Ballas

Michelle Short- you are here :)

Laurie Willison
Jana Millen
Clare Prezzia
May Park

Amy Tsuruta

Libby Hickson

 

GIVEAWAY:

 

Hero Arts are giving away one kit to one lucky winner, selected from all the comments from all the blogs in the hop. The giveaway closes Sunday, 11th March at 11.59 EST and the winner will be announced the following week. If the winner has already purchased the kit, they will be reimbursed for it.

 

The next person on the hop is the fabulous and amazing Laurie. Thank you so much for visiting me today. I hope you have a wonderful time on the rest of the hop and a great rest of the day too!