Clearly Besotted Teasers | Beary Christmas

Hello there and welcome to day two of the Clearly Besotted November 2020 Teasers. Today I am using the new Ring Around Christmas set. This set consists of a beautiful wreath, along with different critters that you can add to it (or you can use it on it's own) and wonderful sentiments too. 

I started off my card by first stamping the bear from the Clearly Besotted Ring Around Christmas Stamp Set on to white cardstock with Memento Tuxedo Black Ink. I then made a mask for him and stamped the wreath over to the top. Once I removed the mask, it looks like he is sitting on top of the present/gift. They were then coloured using Copic Markers (the colours that I used are listed below the supplies section for reference). 

It was fussy cut out using scissors before adhering to the background with foam tape. The background is a panel of Hero Arts Cherry Cardstock with the edges ink blended using Tim Holtz Candied Apple, Aged Mahogany and Black Soot Distress Inks. I then splattered on Arteza Titanium White Gouache (yes, I am obsessed!). The panel was then simply adhered to an A2 white card base with tape runner. 

I took the sentiment from the Clearly Besotted Winter Plushies Stamp Set and stamped it on to black cardstock using Versamark Ink. I applied white embossing powder and heat set. It was cut in to strips and adhered to the card using thin foam tape. To finish off, I added white gel pen highlights to the baubles/ornaments. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

COPIC MARKERS: Bear - E59, E57, E55, E53, E50. Leaves - G46, YG17, YG25. Holly - G29, G46, G43, G40. Blue ornaments, bow & present - B39, B18, B16, B12. Red ornaments and present - R89, R37, R35, R14. Poinsettia flowers - R89, R37, R35, R14, YR24, YR31. Aqua ornaments - BG09, BG57, BG53. Ornament toppers - C3, C1, C00. 

It is quite unlike me to have no white cardstock showing on a card but I do really like how this card came out, even if it is a lot bolder in colour than I usually go! For more inspiration using the new release, please head over to the Clearly Besotted Blog, Keren and Lisa. Thanks so much for visiting me today. I hope you have a wonderful day!  

Clearly Besotted Teasers | Prancing Through The Snow

Hello there and welcome to day one of the Clearly Besotted November 2020 Teasers. This month is all about winter, Christmas and the holidays and I am kicking things off with the most adorable reindeer ever! The Prancing Plushies set has lots of adorable reindeer, some great scene building images and lots of wonderful sentiments. 

I started off by taking a panel of white cardstock and stamping the house and trees image from the Clearly Besotted Prancing Plushies Stamp Set on top using Memento Tuxedo Black Ink. I then made a mask for this and placed it over the top. Using blending brushes, I then blended on Tim Holtz Distress Oxide Inks for the sky. I used Dried Marigold, Picked Raspberry, Seedless Preserves and Black Soot. I then splattered on Arteza Titanium White Gouache, removed the mask and let it sit to dry. 

In the mean time, I took another piece of white cardstock and stamped two of the reindeer from the set on to it using more Memento Tuxedo Black Ink. They were coloured using Copic Markers (the colours that I used are listed below the supplies area) and then fussy cut out with scissors. Once the background piece was dry, I coloured it using Copic Markers as well. 

It was added to an A2 white card base with tape runner and then the reindeer added on top with foam tape. I took the sentiment from the set and stamped it on to black cardstock using Versamark Ink. I applied white embossing powder and heat set. It was then cut in to two strips using the Simon Says Stamp Sentiment Labels Dies and added to the card with more foam tape. I added white gel pen highlights to the reindeer, as well as Tonic Nuvo Crystal Glaze to their noses. To finish off, I added a few Lucy's Bubbles around the sentiment. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

COPIC MARKERS: Reindeer - E59, E57, E55, E53, E51, E50 (+E49 for the noses). Snow - B00, B000. Trees - G46, G43, G40. Houses - E13, E11, E30, Y11, Y00. 

I love these little guys! For more inspiration using the new release, please head over to the Clearly Besotted Blog as well as Keren, Lisa and our guest Keeway. Thank you so much for stopping by today, I really do appreciate it. See you tomorrow for day two! 

VIDEO | Easy Mass-Producible Holiday Card

Hello there, I am over on the Hero Arts Blog and YouTube channel today, creating an easy mass-producible Christmas/holiday card. I am not usually a big fan of mass producing cards, I really admire those who do it, I just do not think it is for me! Where this changes, however, is at Christmas time when I have loads of cards to make all of a sudden! I like to create a few designs and then mass-produce each design say 30 times. For my card today, I thought that the Hero Arts Christmas Lights Border Fancy Die would be perfect for this. Even cutting it with one layer makes a big impact! 

For the background, I started off with a panel of Hero Arts Lapis Cardstock and stamped the sentiment from the Hero Arts Comfort & Joy Messages Set on top and heat embossed in white. I then blended on Blue Hawaii and Navy Inks before splattering with Hero Arts White Glimmer Metallic Ink. I then cut the Hero Arts Christmas Lights Border Fancy Die from white cardstock and added it on top.

VIDEO:

Here is the video showing how I made the card:

If you are viewing this post via email subscription, you can watch the video HERE on YouTube. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

For more information on how I made the card, please head over to the Hero Arts Blog. Thanks so much for stopping by today, I really do appreciate it. I hope you have a great week! 

VIDEO | MFT Holiday Penguin Fold Up Tags

Hello there, I am over on the MFTv YouTube Channel today, sharing two tags that I made using the new Holiday Penguins set, plus lots of other yummy gooodies from the latest release. I thought these images would work perfectly on tags, so I grabbed the Fold Up Tags Die-namics to create them.

I started off by stamping two of the penguins from the MFT Holiday Penguins Stamp Set on to white cardstock with MFT Extreme Black Ink. I then coloured them using Copic Markers (the colours that I used are listed below the supplies area) and then die cut them out with the MFT Holiday Penguins Die-namics. 

I then set about creating the tags. I cut the most solid (back) layer from the MFT Fold Up Tags Die-namics set using white cardstock, twice. I then cut two of the different top layers from the MFT Christmas Cheer Paper Pad, plus the top tabs from MFT Black Licorice Cardstock. 

Before assembling the tags, I stamped the sentiments on the inside from the MFT Mini Merry Messages Stamp Set using more MFT Extreme Black Ink. I then adhered the top of the tags to the bottom using tape runner and MFT On-Point Precision Glue. The top tab was added on top with more glue. I then added twine through the tabs and tied in a bow. 

I thought the tags might be missing something, so I grabbed the MFT Sweet Snowflakes Die-namics (free gift when you spend $60) and cut the two smallest from MFT Silver Sparkle Cardstock. They were added to the tags first using On-Point Precision Glue and then the penguins added on top with foam tape (being careful to only add foam tape to the top part of the penguins). To finish off, I added Tiny Iridescent Bubbles to the centres of the larger snowflakes. 

VIDEO:

Here is the video showing how I made the tags:

If you are viewing this blog post via email subscription, you can watch the video directly on the MFT YouTube channel here. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

COPIC MARKERS: Penguins - BV29, BV25, BV23, BV20, Y11, Y000, Y0000, YR24, YR31. Hats - C3, C1, C00, R85, R83, R81/BG15, BG13, BG11, BG10. 

I really love making tags! I do often end up adding them to cards but I think these will be attached to gifts I send at Christmas :) Thank you so much for stopping by to see me today, I really do appreciate it. I hope you have a lovely rest of the day! 

Birthday Cupcakes

Hello there, if you have followed me for a while, you will know that I make a lot of cards for design/guest design work. For this, I mainly need to stick to that companies products (makes sense!) but when I make cards for myself, I love combining products from different companies. Especially ones where I can personalise the card for the recipient. My niece turned 12 last month and this is the card that I made for her.

I started off by die cutting the MFT Frosted Cupcakes Die-namics. I cut the wrapper from cream cardstock and blended the bottom part with Tim Holtz Antique Linen Distress Ink. For the frosting, I used MFT Sno Cone and Berrylicious (sadly now discontinued) cardstock for one and MFT Grapescicle and Grape Jelly Cardstock for the other. The candles were cut with the same colours but I used a lemon cardstock for the flame and went over it with Copic Markers (Y17, Y11) for some added dimension. I also coloured the wick black. 

For the cupcake faces, I used the smile and cheeks from the MFT Hey Ghoul Die-namics and cut them from pink and black cardstocks. Once the cupcakes were assembled (using liquid glue), I then added googly eyes for some added fun. They were then set aside while I worked on the background. I first placed the Taylored Expressions Rectangle Masking Stencil on to the front of an A2 white card base. On top of that, I placed the Simon Says Stamp Extra Large Dots Stencil. Using blended brushes, I then blended on Tim Holtz Wilted Violet and Broken China Distress Inks. The stencils were then removed. 

I took the numbers from the Concord & 9th Tall Type Numbers Dies and die cut the 1, 2 and 'th' three times each from MFT Grape Jelly Cardstock. They were layered up one on top of another and added to the card with liquid glue. I then took the sentiments from the Concord & 9th Tiny Tagalongs Stamp Set and stamped the happy and birthday on to MFT Black Licorice Cardstock with Versamark Ink. I applied white embossing powder and heat set. They were cut in to strips and added to the card with foam tape. The cupcakes were then also added with foam tape below. To finish off, I added Tonic Nuvo Aqua Shimmer Pen to the 12th and the darker frosting on the cupcakes. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

How about you? When making a card do you stick to one company or do you love to combine different ones depending on the products? I would love to hear your thoughts. Thank you so much for stopping by to see me today. I really do appreciate it. I hope that you are well and staying safe. Take care! 

Spellbinders | Small Die of the Month Fall Leaves Card Creator

Hello there, today I have a card to share with you using the Spellbinders Small Die of the Month Kit for October 2020. This month it is called Fall Leaves Card Creator and there is definitely an autumnal feel to it. Although I do love the autumn colours, I love winter ones even more so I thought that I would go in that direction for my card today. 

I started off by die cutting the leaves from the Spellbinders October 2020 Small Die of the Month Kit from FSJ Denim Days Cardstock, as well as the white glitter cardstock from the FSJ Sparkle Trio Cardstock Set. With the blue leaves, I blended FSJ Huckleberry Fusion and Black Licorice True Color Fusion Inks towards the bottom of the leaves for some added interest (you cannot see it that well, but it makes the leaves not look so flat). I then splattered on some FSJ Sparkle Silk for some added sparkle. 

I took an A2 card base made from FSJ Tin Pail Cardstock and scored lines on the front for some added interest (apologies that it is always difficult to see in photos). Using a circle die and a pencil, I drew a faint circle on to the card to give me a guide on where to place the leaves to create the wreath. I then adhered the leaves, one by one, using FSJ Craft Glue. 

There are three word dies in the kit and I decided to use the 'thankful' one. I cut it twice from Whip Cream Cardstock and then again from the Denim Days cardstock. They were adhered one on top of another and then added to the card with more craft glue. To finish off, I added some Lucy's Glossy Pearls. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

I hope you will check out the Spellbinders Small Die of the Month Kit. It is a monthly subscription where you receive the kit each month. If you do become a member, you will also receive other Spellbinders benefits too. For more information, please see here. You can also purchase previous kits separately but the price is increased for those. You can see them here.

Thank you so much for stopping by to see me today, I really do appreciate it. I hope you have a wonderful day! Take care!

Reverse Confetti October 2020 Release Blog Hop

Hello there, today we are celebrating the release of the Reverse Confetti October 2020 Mini Release with a fun blog hop. My projects today use the new Gift Card Holder Cover Panel die, as well as the Seasonal Says It All (love those bubble words!) set. I hadn't had a chance to use the Holiday Bough set from last month and thought that that set would work well with my projects today too. 

For the blog hop, you should have arrived here from TaeEun but I have the full list of participants below, in case you get lost along the way!

First up, I thought I would create a gift card tag pocket using the new Reverse Confetti Gift Card Holder Cover Panel Confetti Cuts. This die can be used in lots of different ways, on the front of a card, in the inside of a card, can be used alone fitting in an A2 envelope or folded in half, or how I have done and used it as a big tag, making my own vellum envelope for it to fit in to. 

I started off by die cutting the die using red cardstock. I then repeatedly stamped images from the Reverse Confetti Holiday Bough Stamp Set on top, using Versamark Ink. I applied white embossing powder and heat set. I then added some interest to the panel by first going around the edges using Tim Holtz Distress Inks. I used Candied Apple, Aged Mahogany and Black Soot. I then splattered on some Tseukineko Sparkle Sheer Shimmer Spritz and white gouache. Once dry, I removed any excess paint/distress Ink from the embossing powder with a cloth. 

So that you can easily remove it from the envelope, I cut the topper piece from the Reverse Confetti Stitched Grid Tag Die twice from black cardstock and sandwiched the panel between them both. I then added some ribbon through the top and tied it with twine. 

For the envelope, I cut a piece of vellum and scored it, leaving two small flaps to add double sided tape to secure it together. The Reverse Confetti Gift Card Holder Cover Panel Confetti Cuts comes with an extra die that is the same size as a gift card. You can use this to create your own gift cards, or can be used as a panel/embellishment. I thought that I would use it to embellish the front of the envelope but that it would also cover up the gift card inside so that the recipient will not see it through the vellum when properly inside the pocket/envelope. 

I cut the die from blue cardstock and then blended Distress Inks around the edges. I used Blueprint Sketch and Chipped Sapphire. I then stamped the sentiment from the new Reverse Confetti Seasonal Says It All Stamp Set using Versamark Ink. I applied white embossing powder and heat set. I then splattered on the same white gouache and sparkle spray and let it sit to dry. 

Whilst it was drying, I stamped another of the images from the Reverse Confetti Holiday Bough Stamp Set, this time using black ink. I coloured it using Copic Markers (the colours that I used are listed below the supplies area) and cut it out using the Reverse Confetti Holiday Bough Confetti Cuts. It was added to the panel with foam tape and then the panel added to the envelope with more foam tape. To finish off, I added a few Lucy's Iridescent Jewels around the image. 

For my other project, I wanted to create some little tags. I die cut the Reverse Confetti Dashed Line Tag Die from the same red and blue cardstocks. I then used the same Distress Inks as above for the coordinating tags, as well as the sparkle spray and the white gouache and let them sit to dry. 

I took the poinsettias from the Reverse Confetti Holiday Bough Stamp Set, along with the branches and stamped them on to white cardstock with black ink. They were coloured using Copic Markers and then die cut out with the coordinating dies. I took two more sentiments from the Reverse Confetti Seasonal Says It All Stamp Set and stamped them on to black cardstock with Versamark Ink. I applied white embossing powder and heat set. They were cut in to strips and then added to the tags with foam tape, along with the poinsettias. To finish off, I added on more jewels. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

COPIC MARKERS: Poinsettias - R89, R37, R27, R24, R14, YR24, YR31. Leaves - G29, G46, G43. Berries - B18, B16, B12. 

BLOG HOP:

Here is the full list of participants taking part in the hop today:

Reverse Confetti Blog

Amy Kolling

Ali Farmer

Tricia Barber

Lisa Henke

Amy Tsuruta

Megan Quinn

Kathy Schweinfurth

Olga Moss

Jeanne Jachna

Nicole Vogeli

Deanne Kuntz

Mayra Duran-Hernandez

Olga Matyushevskaya

TaeEun Yoo

Michelle Short - You are here!

As you can see, I am the last on the hop but if you would like to start at the beginning, please head over to the Reverse Confetti Blog. Thank you so much for stopping by to see me today. I really do appreciate it. I hope that you will check out the rest of the fabulous release. Have a great day! 

MFT October 2020 Release | I'm Here For You

Hello there, today I have a card to share with you using the new October 2020 release from My Favorite Things. I fell in love with the adorable critters in the Partners In Adventure set, so I thought that I would use those for my card today. 

I started off by stamping the seal, bear and penguin, icebergs, clouds and sun images from the MFT Partners In Adventure Stamp Set on to white cardstock with MFT Extreme Black Ink. I then coloured them using Copic Markers (the cololurs that I used are listed below the supplies area) and  die cut them out using the MFT Partners In Adventure Die-namics. I took the MFT A2 Circle Stax Dies and cut two circles for the card base and then three for the panels/layers. For the card base, I cut a small slither off of one piece (to help the card stand up), scored the other end and adhered it to the other piece (to create a hinge at the top of the card).

For the first smaller circle, I placed the MFT Mini Cloud Edges Stencil on top and blended on Tim Holtz Mermaid Lagoon Distress Ink for the sky. The other circles were cut down using the MFT Ocean Waves Die-namics and blended with Mermaid Lagoon, Blueprint Sketch and Chipped Sapphire Distress Inks. I splattered on some water and white gouache and set them aside to dry. The background cloud piece was adhered on to the card base with tape runner. I then cut another circle from MFT Translucent Vellum to place over the top, adhering it down below the waves.

The waves, icebergs, clouds and sun were then added on top with tape runner and/or MFT On-Point Precision Glue. The seal, bear and penguin were added on with foam tape. The sentiment, from the MFT Bitty Bears Stamp Set was stamped on to black cardstock with Versamark Ink. I applied white embossing powder and heat set. It was die cut in to a strip using an MFT Skinny Strips Die-namics and then added to the card with more foam tape.  

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

COPIC MARKERS: Bear - E47, E44, E43, E42, E41, R01, R00. Penguin - BV29, BV25, BV23, BV20, YR21. Seal - W5, W3, W1, W00, R01, R00. Icebergs - B02, BG02, BG01, BG000. Clouds - BG11, BG10, BG0000. Sun - Y17, Y15, Y13, Y11. 

Aren't they adorable? And this set is huge, there are loads of other critters in the set plus some fabulous sentiments too. I hope that you will check out the rest of the release. I will be back later in the month using more sets from the release. Thank you so much for stopping by today, have a wonderful rest of the day! 

VIDEO | Hero Arts October 2020 My Monthly Hero Kit Blog Hop + Giveaway

Hello there and welcome as the celebrate the release of the Hero Arts October 2020 My Monthly Hero Kit and add-on sets. The release has definitely got a winter/Christmas/holiday feel to it this month. I have already made a card using the kit, which you can see here. That card focused mainly on the frame cuts in the kit so for this one, I am using a stamped image.

I thought that I would create a wintry night sky using the Santa, sleigh and reindeer image in the main kit stamp set for my card. So I started off by stamping the image on to Hero Arts Dove White Cardstock using Hero Arts Intens-ified Black Ink. I then die cut it out using the coordinating frame cut and set it aside. I also stamped the sentiment from the set on to Hero Arts Pitch Black Cardstock with Clear Embossing & Watermark Ink (you get a little cube of this in the kit). I applied Hero Arts White Detail Embossing Powder and heat set. It was cut in to a strip and again set aside while I worked on my background.

I first die cut a Hero Arts Nesting Circle Infinity Die from mask paper and adhered this in to the top middle of a panel of Tim Holtz Distress Watercolor Cardstock. Using ink blending brushes, I then blended on Hero Arts Reactive Inks for the night sky. I used Thistle, Grape Slush and Blue Hawaii. I then also blended on a little Intens-ified Black to darken up the edges.

Keeping the mask in place, I then splattered on some Hero Arts White Iridescent Shimmer Spray, using this as a binder, I took the White Sparkle Embossing Powder that comes in the kit and sprinkled this on top. I then heat set it. I then added more splatter to the right hand side of the panel. For this I dabbed on some water with a paintbrush to use as the binder. Sprinkled on more powder and heat set. The mask was then removed and I used an E50 Copic Marker, along with the Colourless Blender to colour in the moon.

The panel was run through my die cutting machine (without dies) to help flatten it and then it was adhered to an A2 white card base with foam tape. The sentiment and image were also added with foam tape. To finish off, I added Lucy's Iridescent Jewels around the sentiment, adhering in place with Hero Arts Precision Glue.

VIDEO:

Here is the video showing how I made the card:

If you are viewing this blog post via email subscription, you can watch the video HERE on YouTube.

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

THE KIT:

The Hero Arts October 2020 My Monthly Hero Kit contains a 6" x 8" Clear Stamp Set, 12 Coordinating Frame Cuts, 1 Ornament Shape Die, 2 Inner Ornament Dies, 3 Embossing Powders (Red, Glacier Blue, White Sparkle) and 1 Watermark & Embossing Ink Cube.

The kit is valued at $76 but you can get it for $34.99 (approximately £28 depending on exchange rate). The kits are limited edition and often sell out quickly. You can subscribe here so that you never miss a kit. International kit subscribers get a discount off shipping too! Kits begin shipping on 11th October 2020.

ADD-ONS:

There are lots of fabulous add-on products this month. These products are not limited edition and can be purchased alongside the kit from Hero Arts, or from your favourite retailer. Here is a look at them:

BLOG HOP:

For the blog hop, you should have arrived here from the fabulous Maria. Next on the hop is the wonderful Mindy. If you get lost along the way, you can see the full list of participants over on the Hero Arts Blog. 

GIVEAWAY:

Hero arts are giving away a $50 shopping spree to one luck blog hop reader. To enter, leave a comment on the stops in the hop. The more you comment, the more chances to win. The giveaway closes Sunday 11th October 2020 at 11.59pm PT and the winner will be announced the following week over on the Hero Arts Blog. Good luck!

Next on the hop is the blog of Mindy. Thank you so much for stopping by to see me today. I really do appreciate it. I hope you have a lovely time on the hop and a great rest of the day! Take care. 

Hero Arts | My Monthly Hero October 2020 Countdown

Hello there and welcome as we countdown to the release of the Hero Arts October 2020 My Monthly Hero Kit. Release day is 5th October 2020 at 1pm ET/10 am PT/6pm BST. We are sharing inspiration all week long so do head over to the Hero Arts Blog where there will be links to all the designers sharing. 

For my card today, I am using the main kit stamp set and dies to create an ornament scene. I started off by die cutting the ornament from the kit using Dove White Cardstock. I then took a Nesting Hearts Infinity Die and cut this in to the centre of the ornament to create a window. I die cut the two birds in the kit from Lapis Cardstock and then blended on Navy Mid-Tone Shadow Ink for some added dimension.

The sentiment from the main kit stamp set, was stamped on to Pitch Black Cardstock using Clear Embossing & Watermark Ink (a little pad comes in the kit). I applied White Detail Embossing Powder and heat set. It was cut in to a strip and ribbon ends cut. I then set these aside while I worked on my background. I took a panel of Cherry Cardstock and blended Red Royal Mid-Tone Shadow Ink around the edges, followed by Raspberry Jam Mid-Tone Shadow Ink, to darken it further. 

I then added the panel in to my splat box before splattering it with White Iridescent Shimmer Spray and white gouache. Once the panel was dry, It was adhered on to a Cherry A2 card base with tape runner. The ornament was added on top with foam tape, followed by the sentiment and birds. To finish off, I added a twine bow to the top of the ornament and gemstones to the birds. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

Make sure to head over the Hero Arts blog post and leave a comment over there for a chance to win a kit. Thank you so much for stopping by today, I really do appreciate it. I hope you have a lovely day! 

VIDEO | Clearly Besotted October 2020 Release Preview

Hello there, I am back to share a look at the whole Clearly Besotted October 2020 Release. There are eight new stamp sets releasing this month that can be purchased as a bundle (with free gifts and a discount off price) or individually. The sets this month mainly have a winter/Christmas/holiday feel to them but there are a few that can be used all year round too. 

The sets release tonight at 8pm BST. You can purchase the individual sets over at Clearly Besotted or at Simon Says Stamp but the bundle is exclusive to the Clearly Besotted store. Here is a look at all of the sets plus a recap of the cards that I have made for the release:

If you are viewing this post via email subscription, you can watch the video HERE on YouTube. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

What do you think of the sets? Super cute, right? For more inspiration using the sets, please head over to the Clearly Besotted Blog. Thanks so much for joining me this last week for the release. I hope you have a wonderful day! 

Clearly Besotted Teasers | From Our Home To Yours

Hello there and happy Clearly Besotted release day! I have one last teaser to share with you this morning before taking a look at the whole release a little later. My card today uses two new sets - Naughty or Mice and Seasonal Scenes. Although these sets both work great on their own, I couldn't resist combining them! 

I started off by stamping two of the mice from the Clearly Besotted Naughty or Mice Stamp Set on to white cardstock with Memento Tuxedo Black. I then stamped the snow globe and the garland from the Clearly Besotted Seasonal Scenes Stamp Set. I created masks for these and then stamped the inside house scene on top with more black ink. 

The masks were removed and the images coloured using Copic Markers (the colours that I used are listed below the supplies area). I then fussy cut the image as a whole out using scissors and went around the edges with a Memento Tuxedo Black Pen. I then took two pieces of paper from the Sunny Studio Subtle Grey Tones Paper Pad (one for the wallpaper and one for the floor) and cut them using a Hero Arts Nesting Circle Infinity Die. 

I also cut two larger circles from white cardstock to use as the card base. I scored the top of one piece and adhered the circles back to back to make the card. I took the sentiment from the Clearly Besotted Feeling Sentimental Stamp Set and stamped it on to the floor patterned paper piece and then adhered them both on to the front of the card. The image was added on top with foam tape. To finish off, I added Tonic Nuvo Crystal Glaze on to the star and ornaments on the tree. 

SUPPLIES:

Here are the links to what I have used on the card. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

COPIC MARKERS: Mice - W5, W3, W2, W1, R00. Fire glow - Y11, Y00, Y0000. Tree - G29, YG17, YG25, YG03, YG01. Ornaments, cracker & garland - R89, R37, R24. Star - Y17, Y15, Y13, Y11. Presents & holly - R89, R37, R24, G29, YG17, YG03, YG01. Chair and presents - B18, B26, B24, B12. Snow globe - E55, E53, E50, B000, YG17, YG03, BG10. Fireplace - C10, C8, C6, C5, E55, E53, E51, YR16, Y17, Y15, Y13, Y11, Y00. 

For more inspiration using the new release, please head over to the Clearly Besotted Blog, Keren, Lisa and our fabulous guests Caly and Francine. Thank you so much for stopping by today, see you tomorrow for day two! have a lovely day!