Spellbinders | Not Your Ordinary Card

Hello there, today I have a gift card holder to share with you using the Spellbinders Not Your Ordinary Card Collection by Wendy Vecchi. This envelope die isn't made to be a gift card holder, there is another die that you can cut to make a card to go inside it, but I thought it would be fun to turn it into a gift card holder today. 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I started off by creating the envelope. I cut the envelope die from the Spellbinders Essential Envelope Die Set from white cardstock. I then placed the Spellbinders Plaid Builder Layered Stencil on top, one by one, and added ink blending to create the plaid pattern. Instead of making a full plaid pattern, I decided to focus the pattern towards the left and bottom of the envelope. I used Concord & 9th Ink Cubes in Aqua Sky, Sea Glass, Oceanside and Peacock. 

I cut the flower and leaves from the Spellbinders Essential Envelope Die Set using white cardstock for the flower, and vellum for the leaves. I also cut flower centres using the Spellbinders Everlasting Circles Etched Dies set. I added ink blending to these with the same colours that I used for the plaid. I assembled and adhered the envelope and then adhered the leaves on top, followed by the flower, using thin foam tape. 

I hot foiled a sentiment from the Spellbinders You Are Everything Sentiments Press Plate & Die Set using Spellbinders Silver Foil. It was cut out and adhered to the envelope. To finish, I embellished with Spellbinders Silver Mix Color Essentials Gems. For the gift card part, I cut a panel of white cardstock to fit inside the envelope and rounded the corners with the Spellbinders 1-2 Punch. I die cut the bow from the Spellbinders Christmas Cocktails Etched Dies and adhered it to the top. The gift card was then adhered on top using temporary adhesive. 

SUPPLIES:

 

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

As I say, this isn't how this die is meant to be used but that's the great thing with card making, you can change things to suit your needs! Thank you so much for stopping by today, I really do appreciate it. I hope you have a wonderful day! 

Simon Says Stamp + Altenew STAMPtember 2024 Collaboration

Hello there, I hope you are well. Today I have a card to share using the Simon Says Stamp + Altenew STAMPtember 2024 collaboration set. I was kindly sent the Azalea Bunch Stamp Set to play with but there is a bundle with the stamp set, die set and stencils too, if colouring and fussy cutting is not your thing!

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I started off by stamping the main image from the Simon Says Stamp + Altenew Azalea Bunch Stamp Set onto Neenah Desert Storm Cardstock using Altenew Permanent Black Ink. I then coloured it using Altenew Woodless Coloring Pencils (Jet Black, Moon Rock and White). I did then go in with a little Luminance White Pencil, as this is very bright white, just on the edges of the flowers and leaves. 

I fussy cut the image out using scissors. I then took another panel of Desert Storm Cardstock and placed it inside the Altenew Deck Planks 3D Embossing Folder and ran it through my die cutting machine. I mixed a little Altenew Carbon Black Artists Gouache with water and splattered it onto the panel. Once dry, it was adhered to a US A2 sized card base (made from the same cardstock) using tape runner adhesive.

The image was then adhered on top with thin foam squares. I stamped a sentiment from the set onto black cardstock using Altenew Embossing Ink. I applied Pure White Crisp Embossing Powder and heat set. It was cut into a strip and adhered to the card using more thin foam squares. To finish, I added a few white gel pen (0.5 size) dots on the flowers. 

SUPPLIES:

 

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

This set is exclusive to Simon Says Stamp and once it is sold out is gone for good, so if you like it, grab it while you can! Whilst I love ink blending images these days, it was so nice to get the pencils out and enjoy colouring (even if it was in monochrome!). Thank you so much for stopping by today, I really appreciate it. I hope you have a wonderful day! 

Spellbinders | Birthday Bird

Hello there, today I have a card to share with you using the super cute Spellbinders Love Note Bird die set from the Out & About Collection. As you can see, the bird is pretty big in size so it does take centre stage on a card which is nice! 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I started off by die cutting the bird from the Spellbinders Love Note Bird Etched Dies from Spellbinders Glacier, Raindrop and Cosmic Sky Cardstock. The legs were cut from Spellbinders Graphite Cardstock and the beak from Spellbinders Beeswax Cardstock. The layers were adhered using Bearly Art Glue. 

I cut the foliage from Spellbinders Peridot and Rainforest Cardstock and the flowers from Spellbinders Pink Sand Cardstock. The envelope was cut from white cardstock and the heart from Spellbinders Pink Sand Cardstock (twice for added dimension). 

I adhered the foliage first to a US A2 sized white card base using Bearly Art Glue. I then adhered the bird using foam squares and the envelope using thin foam tape. The flowers were shaped and adhered using Bearly Art Glue. 

I pressed the sentiment from the Spellbinders Always & Forever Press Plate & Die Set onto Spellbinders Porcelain BetterPress Cotton Card using Spellbinders BetterPress Black Ink and the Spellbinders BetterPress Letterpress System. The sides were cut down and the sentiment adhered to the card with foam tape. To finish, I embellished with Spellbinders Silver Color Essentials Gems and added Nuvo Crystal Glaze to the heart. 

SUPPLIES:

 

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

Thank you so much for stopping by today, I really do appreciate it. Wishing you a wonderful week ahead! 

VIDEO | Make 3D Embossing Shine!

Hello there, today I have a fun technique to share - making 3D embossing shine with one metallic ink pad! I shared a similar technique of using the back of embossing folders with black ink in the past (you can see that HERE) but this time, I thought I would use metallic ink to add lots of shine. 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I started off my tags by die cutting two using the Altenew Terrific Tags Die Set - one from white cardstock and one from black cardstock. I placed them inside the Altenew Flutter & Bloom 3D Embossing Folder but made sure to face the front of the tag to the back of the embossing folder, since it is the back we are using today. 

I placed the tags on an Altenew Sticky Mat and then using Altenew Antique Gold Metallic Ink, I swiped it on top of the tag. Anywhere there is raised area (in this case, the outside edges) the ink will go. Since this is a 3D embossing folder, there are different levels of embossing/debossing so some of the ink goes inside the images (butterfly and flowers) but most of it is on the raised areas which is the outside. 

For the tag made from white cardstock, I wanted the outside raised areas to be opaque with the ink so using the corner of the ink pad, I went over these areas multiple times until no white cardstock was showing through. On the tag made with the black cardstock, I wanted some of the cardstock to show through (kind of like an engraved look), so I didn't press too hard. I then dried both with a heat tool (this did take a long time since there are multiple layers of ink!). 

I die cut the 'hello' die from the Altenew Playful Flowers Die Set from both white cardstock and black cardstock. I added Altenew Double-Sided Adhesive Sheet to the back of the cardstock before die cutting them three times. They were layered up one on top of another, so that the words are three die cut layers high.

I cut the tags again from sold cardstock and adhered them to the back of the embossed/debossed tags. This covers the embossing on the back and gives me somewhere to write a personal message. The sentiments were then adhered on top. I added twine through the top of the tags and tied in bows and then to finish, embellished with Altenew Onyx Black Gem Sparkles. 

VIDEO:

Here is the video showing how I made the tags:

If you are viewing this blog post via email subscription, you can watch the video HERE on YouTube. 

SUPPLIES:

Here are the links to what I have used on the projects. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

I hope you will give the technique a try, it is a fun one and doesn't require many supplies! Thank you so much for stopping by today, I really appreciate it. I hope you have a wonderful day! 

Spellbinders | Sealed Pretty Christmas 3D

Hello there, I am delighted to be over on the Spellbinders Blog today sharing some pretty packaging using the Sealed Pretty Christmas 3D Collection. I created lots of boxes, envelopes and tags. You can see them all over there but I wanted to share a little peek of one here too ...

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

This box was made by die cutting the Spellbinders Ribbon Box Etched Die from white cardstock (you cut it twice as each piece cuts two sides of the box) and then it was run through my Platinum Six inside the Spellbinders Flurry of Snowflakes 3D Embossing Folder. The box was assembled and then tied with ribbon and gold cord. I created a wax seal using the Spellbinders Evergreen Joy 3D Wax Seal and Pearl White Wax. I added  a little Decocolor Gold Pen on top of the joy word to help it pop. 

SUPPLIES:

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

For more details on how I made the box, as well as the other projects I created, please head over to the Spellbinders blog post. Thank you so much for stopping by, I hope you have a great day! 

Spellbinders | Luna the Seahorse

Hello there, today I have a card to share using the cutest seahorse there ever was - Luna the Seahorse! Isn't she adorable? She is from the Spellbinders Out & About Collection. I paired her with the fab Tunnel Scapes Collection, which as you can see, work perfectly with her! 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I started off my card by creating the background. I took the Spellbinders Underwater Tunnel Etched Dies and cut the front layer from white cardstock, the second layer from Spellbinders Glacier Cardstock, the third layer from Spellbinders Raindrop Cardstock and the fourth layer is Spellbinders Cosmic Sky Cardstock adhered to the back. 

The blue layers were adhered flat to a US A2 sized white card base and the white layer adhered using thin foam tape. I then die cut the seaweed from the Spellbinders Underwater Tunnel Etched Dies, as well as the Spellbinders Luna the Seahorse Etched Dies from Spellbinders Peridot, Rainforest, Purple Mist and Lilac Blossom Cardstock. The starfish were cut from the same purple cardstocks. 

I die cut Luna the Seahorse from Spellbinders Waterfall Cardstock. I cut her eye from black cardstock and her cheek blush from Spellbinders Pink Sand Cardstock. I added ink blending to her using Altenew Enchanted Garden and Sweet Dreams Fresh Dye Inks. I also added some ink blending to the seaweed using the same purples, as well as Altenew Green Valley Fresh Dye Inks. 

I adhered the seaweed to the card first, popping the bottom of them behind the white layer. Luna was then adhered using foam squares. I stamped a sentiment from the Spellbinders Typewriter Adventure Sentiments Stamp Set using Spellbinders Clear Embossing & Watermark Ink. I applied white embossing powder and heat set. It was cut into a strip and adhered to the card with foam tape. To finish, I embellished with Spellbinders Aquamarine Color Essentials Gems. 

SUPPLIES:

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

Thank you so much for stopping by today, I really do appreciate it. I hope you have a wonderful day and a great week ahead!

Simon Says Stamp + Hero Arts STAMPtember 2024 Collaboration

Hello there, today I have two tags to share with you that I made using the Simon Says Stamp + Hero Arts STAMPtember 2024 collaboration set called Celebrate. There are lots of ways you can purchase this set - the stamp set on it's own, the stamp set plus both sets of dies, the stamp set + floral dies and the stamp set + sentiment dies. 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I started off my tags by stamping two of the floral images from the Simon Says Stamp + Hero Arts STAMPtember Celebrate Stamp Set onto Hero Arts Deluxe Smooth White Cardstock using Hero Arts Intens-ified Black Ink. I then coloured them using Copic Markers (the colours that I used are listed below the supplies section for reference).

I then fussy cut them out using scissors (but as I say, there are coordinating dies if you wanted to purchase them). I stamped the sentiments (made from longer sentiments in the set) onto Hero Arts Pitch Black Cardstock using Hero Arts Clear Embossing & Watermark Ink. I applied Hero Arts White Detail Embossing Powder and heat set. They were then cut into strips using Simon Says Stamp Sentiment Labels Dies. 

I die cut two Hero Arts Nesting Tag Infinity Dies from white cardstock and cut the eyelet/hole reinforcer from Hero Arts Pitch Black Cardstock. It was adhered on top using Hero Arts Precision Glue. On one of the tags, I stamped the splatter images in the set using black ink. The flower images and sentiments were then adhered on top using thin foam squares. To finish, I added twine through the top of the tags and tied in a bow. 

SUPPLIES:

 

Here are the links to what I have used on the projects. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

COPIC MARKERS: Purple - V09, V17, V15, V01. Black - 110, C8, C6, C5. Pink - RV69, RV66, RV55, RV55. Green - G29, YG17, YG23, YG01. 

There are lots of other pretty flowers in the set, as well as more wonderful sentiments. This set is exclusive to Simon Says Stamp and once it is sold out, it is not coming back, so if you like it, grab it while you can! Thank you so much for stopping by today, I hope you have a wonderful Sunday! Take care! 

Spellbinders | Merry & Bright

Hello there, I was over on the Spellbinders Blog yesterday, sharing three projects using the Essential Holiday Collection by Lisa Horton. As the name suggests, this collections is filled with essentials/basics like backgrounds, tags, frame dies etc. and a lot can be used all year round. 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

The little peek above shows one of the cards I made using the collection. I cut the tree dies from the Spellbinders Nested Tree Frame Etched Dies (love it!) and cut it from pink and aqua cardstock before adding the snow layers on top (there are also baubles/ornaments and a star too!). The sentiment is from the Spellbinders Essential Tag Accessories Press Plates & Die Set, which I hot foiled. 

SUPPLIES:

 

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

For more information on how I made the card, as well as the other projects I made using the collection, please head over to the Spellbinders blog post. 

Thank you so much for stopping by today, I really do appreciate you! I hope you have a wonderful weekend! 

Spellbinders | Many Thanks

Hello there, I hope you are well! Today I have a card to share using the Spellbinders September 2024 Large Die of the Month Club Kit. The kit is called Picture Perfect Autumn and creates an autumn scene with a landscape, barn, trees and sunflowers. 

It is a really pretty scene but if you have followed me for a while, you will know that I love sunflowers, so I opted to use just those on my card today. That's what I love about these kits, you can really customise them as you wish! 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I started off by die cutting the sunflowers in the Spellbinders September 2024 Large Die of the Month Club Kit from Spellbinders Beeswax and Latte Cardstock. I cut the leaves and stems from Spellbinders Peridot Cardstock. I added ink blending to them using Altenew Fresh Dye Inks in Golden Sunset, Coffee Break and Green Valley. 

The flowers were assembled and adhered using Bearly Art Glue. I then die cut the sentiment from Spellbinders Onyx Cardstock, popped out the little pieces of the letters and adhered white cardstock behind. The sentiment strip is a bit bigger when cut but I cut it down slightly to make it smaller. It is hard to read in the photos but a little easier in real life!

I placed a panel of white cardstock inside the Spellbinders Tufted 3D Embossing Folder and ran it through my Platinum Six. It was adhered to a US A2 sized white card base and the leaves and stems adhered on top with Bearly Art Glue. The flowers and sentiment were adhered with foam tape. To finish, I embellished with Spellbinders Gold Mix Color Essentials Gems. 

SPELLBINDERS CLUB KITS

Spellbinders Club Kits are wonderful monthly subscription where you receive a kit each month. Designers like myself share inspiration using the kits at the beginning of the month to show you lots of different ways that you can use it. 

I am using the Large Die of the Month Club Kits but there are also lots of other club kits too, like the Small Die of the Month, Clear Stamp & Die of the Month, Embossing Folder of the Month (plus lots more!), so there is something for everyone! If you do subscribe, you will get other benefits from Spellbinders too. Please see here (UK) or here (USA) for more information. 

To buy the kit - if you are a current subscriber to the Large Die of the Month Club Kit (or any kit), you do not need to do anything. You will be charged as normal on the 5th of the month and your kit will be shipped to you. If you are a new subscriber, you can purchase the kit from the 6th - 27th September 2024. Members can cancel their membership at any time. If you are not keen on subscribing to the kit but still want it, you can purchase it individually (without a subscription) on the 10th of the following month. 

SUPPLIES:

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

Thank you so much for stopping by today, I hope you have a wonderful day! 

Spellbinders | Sprinkle & Grow

Hello there, I hope you are well! Today I have a card to share that I made for my mum using the Spellbinders Sprinkle & Grown dies from the Out & About Collection. My mum completed a big achievement and so I wanted to tell her how proud I was of her. She loves gardening, so I thought this set would work well for her! 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I started off my card by die cutting the watering can from the Spellbinders Sprinkle & Grown Etched Dies set from Spellbinders Waterfall Cardstock. I then adhered the pieces together using Bearly Art Glue. I cut the foliage (leaves and stems) for the flowers from Spellbinders Peridot & Rainforest Cardstock. 

The flowers were from Spellbinders Purple Mist & Lilac Blossom Cardstock and Hero Arts Ultra Pink Cardstock. I wanted to bulk out the watering can a little, so I cut extra flowers from the Spellbinders Garden Buddies Etched Dies. 

I placed the flowers and foliage inside the watering can and secured them on the back. It was then adhered to a US A2 sized white card base with thin foam tape. I die cut the bird from the Spellbinders Garden Buddies Etched Dies from Spellbinders Alabaster, Dune and Onyx Cardstock. It was adhered to the card with foam tape. 

I pressed the sentiment from the Spellbinders Always & Forever Press Plate & Die Set onto Spellbinders Porcelain BetterPress Card using Spellbinders BetterPress Black Ink and the Spellbinders BetterPress Letterpress System. I cut the sides down before adhering to the card with foam tape. To finish off, I embellished with Spellbinders Silver Mix Color Essentials Gems. 

SUPPLIES:

 

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

I really like the watering can full of flowers but that bird is just so sweet! Thank you so much for stopping by today, I really appreciate it. I hope you have a wonderful day! 

Hero Arts | Add Interest to Backgrounds

Hello there, I am over on the Hero Arts Blog today, sharing a card using the new Perforation Cover Plate. This die can be used in so many different ways but for today, I thought I would use it to add interest to a background. 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

I die cut the Hero Arts Perforation Cover Plate from Hero Arts Deluxe Smooth White Cardstock and added ink blending on top with Hero Arts Aquatic, Kiwi and Paradise Core Inks. I splatted Hero Arts White Iridescent Shimmer Mist on top and set it aside to dry. 

I stamped and heat embossed the floral image from Hero Arts Sweet As Honey onto vellum and die cut out. It was adhered to the panel and the excess wrapped around the edges before adhering to a white card base. The sentiment from Hero Arts Message Strips Stamp & Cut XL was heat embossed onto Hero Arts Pitch Black Cardstock. To finish, I embellished with Hero Arts Clear Enamel Dots.

SUPPLIES:

 

Here are the links to what I have used on the project. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

For the full details on how I made the card, please head over to the blog post here. Thank you so much for stopping by today, I really do appreciate it. I hope you have a wonderful day! 

VIDEO | Using Cardstock Scraps to Create Mini Scenes

Hello there, today I have two tags to share using the Altenew Winter Village Die Set. The dies are so tiny that it is a perfect opportunity to use up cardstock scraps. 

Whilst I try not to be, I am a bit of a hoarder when it come to cardstock! I do keep lots of little bits of cardstock because they come in handy for things like this! How about you? Do you keep little bits of cardstock? 

PLEASE NOTE: This post contains affiliate links. Please see below for my full disclosure.

For the tags, I started off by die cutting two of the medium sized Altenew Terrific Tags Dies from Altenew Caribbean Sky Cardstock. I then added ink blending on top with Altenew Persian Blue and Ultraviolet Fresh Dye Inks. I focused the ink towards the top of the tags and faded it to the colour of the cardstock towards the bottom. 

I placed the tags in my Splat Box, mixed Altenew Titanium White Artists' Gouache with a little water and splattered it onto the tags to create snow fall. I then set them aside to dry while I worked on the scenes. 

I die cut another two tags from white cardstock and cut them down further using the landscape die in the Altenew Winter Village Die Set, to create snowbanks. They were adhered to the bottom of the tags using Altenew Glue Tape. I then die cut the houses from Altenew Blush and Volcano Lake Cardstock and the roof and doors from Altenew Coral Bliss and Lagoon Cardstock. 

The pieces were adhered together using Bearly Art Glue and then I added a little vellum behind the windows. The trees were cut from Altenew Parrot and Forest Fern Cardstock. The trees were adhered to to the tags flat and the houses adhered with Altenew Instant Dimension Foam Tape. 

I stamped the 'happy holidays' sentiment from the Altenew Pocket Sentiments Stamp Set onto white cardstock using Altenew Obsidian Pigment Ink twice. They were die cut out using the coordinating dies and adhered to the tags. I added twine through the top of the tags and tied in bows and then to finish, added white gel pen dots of snow to the trees and houses. 

VIDEO:

Here is the video showing how I made the tags:

If you are viewing this blog post via email subscription, you can watch the video HERE on YouTube. 

SUPPLIES:

 

Here are the links to what I have used on the projects. Affiliate links are used on some products. This means that if you make a purchase after clicking on my link, I receive a small commission with no extra cost to you. I truly appreciate your support when using these links. Please click on the logo below the product to shop at your favourite store. All products were personally purchased except those from Clearly Besotted, Hero Arts or those marked with an asterisk (*) which were kindly sent to me to use. You can read my full disclosure here.

Thank you so much for stopping by today, I really do appreciate it. I hope you have a wonderful day!